Alpine stereo radio improves your driving experience by giving you cool music and other exciting features. The stereo comes with different settings and features which can make you struggle sometimes. Getting a new stereo that you haven't used before can make you make the wrong settings especially turning off the alpine touch screen.
There are several ways one can use to turn off the Alpine Touch screen. The common method is the use of Settings which makes it easy to navigate across the touchscreen. All you need is to go to the HOME bar select settings and you are good to go. It is straightforward and easier to follow
Many car owners find it hard to turn off the touch screen. But that's not the case, the steps are straightforward and anyone can implement them. In this guide, I will discuss several ways one can use to turn off the touchscreen. Enjoy reading.
Alpine has different models depending on the properties. Some of the common Alpine models include Alpine Ute-73bt Car, Alpine Ilx-W650, Alpine CDE-124SXM, and Alpine ute 73bt. Each model has its own way of turning off the touch screen but most models share the same steps.
To turn off the touch screen. Follow the steps below:
Go to the home settings. Navigate to Settings, and click on the DISP button. Press and hold it to change it from OFF to ON.
To Turn On Alpine Touch Screen Radio, go to the home settings. Navigate to Settings, and click on the DISP button. Press and hold it to change it from ON to OFF.
When you face any challenges with your Alpine Touch screen radio, some of the things that you imagine is doing a reset to solve the issues. It applies all the Alpine models both old and new. Resetting removes all the previous settings and you can't get them back when the process is over. The process is simple and everyone can implement it when they want to do it.
Follow the steps below:
Turn on the car stereo without any DVD in it. Open the DVD player and press the main menu button or if you have the remote you can use the SETUP button on your remote. Locate the right key and press it three times to open the Preferences page. On your remote press 9653 and choose your region using the up and down arrow keys. To access all the regions press 0. Click the Enter button and everything will work fine.
Having an accurate time is an important aspect for every car owner. Despite having clock on the car dashboard, its good to ensure that your time on the dashboard matches with that of the stereo screen. The settings may vary according to the Alpine model but some of them share the same settings.
To change the time on your Alpine Touch Studio, follow the steps below:
This method applies to most of the Alpine models. Follow the steps below:
Press and hold the audio key for two seconds. This opens the configuration mode.
Do a rotation of the encoder and choose the General option.
Turn the rotary encoder and choose Clock ADJ and you will see numbers blinking showing time.
Rotate the rotary button until you get the right hour. The clock will keep on blinking. Repeat the same steps for minutes.
After you have finished the whole process, the clock will be okay and you have to go back to normal mode.
Press and hold the setup button for two seconds and everything will be ok. There are many variations when it comes to time setting depending on time.
Go to the settings menu at the top of the bar and access the Settings menu.
Use the up and down arrows to navigate through the settings options until you get to the Clock section. Press the Set Oclock button.
Under the Set Oclock option. Use the up and down arrows to select the correct time. All you need is to make adjustments according to the right hours. Move the right arrows to ensure you get the right minutes.
After finishing all the settings, press the center button and save the changes. Exit the menu by exiting the Settings app.
Press the audio button and hold it for two seconds to activate the selection mode.
Turn on the rotary encoder and choose the GENERAL option and press Enter.
Turn on the rotary encoder again and choose the CLOCK ADJ option and press Enter.
Turn on the rotary again and choose hours as it blinks and adjust the right hours. After getting the right adjustments, click ENTER to save the changes.
Turn on the rotary encoder again and choose minutes as time goes on after completing the process, press ENTER to save the changes.
Press the power button to turn the Alpine LLC-W650 on.
Go to home and access Settings.
Scroll down and locate the Clock option under the settings.
Use the arrows to move up and down and select the hours and minutes.
After choosing the right date and time. Head back to the settings and click on the menu and save the changes. Exit the settings menu and that's how you set the clock on Alpine.
Unlike other Alpine car stereos, for you to access the clock settings you use the head unit. Locate the rotary knob and navigate through the options and click on the Clock option.
Hold and press the rotary knob and choose the time by choosing the right time by hours, minutes, and seconds.
Click on the menu buttons and exit.
The alpine ute 73bt is a bit different from the rest of the Alpine stereos. When you want to set a time on the Alpine you press the menu button on the faceplate. Using the tuning knob navigate till you reach the Clock set option. Click on the menu button and choose your hours, minutes, and seconds. Press the Menu to save the settings and exit the menu.
After installing Alpine radio in your car, there are several settings that one needs to know how to manage them. Turning off the touch screen is one of the options one should know how to do it. It saves a lot of time and there is no need to visit any repair shop or technician. The whole process varies from one model to another.
At Geek computer, we provide expert consultation and repair for all your stereo needs.